Appliance Front - Miele Built-in coffee machine Operating And Installation Instructions

^ Reassemble the lid as illustrated.
Check that all parts have been
reassembled correctly:
– There is no gap between the two
parts of the lid.
– The lid is correctly fitted to the glass
jug. The rotary valve sits above the
cappuccinatore handle.
Cleaning and care

Appliance front

If soiling is not removed promptly, it
could cause the surface of the
machine to alter or discolour.
Remove any soiling immediately.
Make sure that water cannot get
behind the display.
All surfaces are susceptible to
scratching. Scratches on glass
surfaces could even cause a
breakage.
Contact with unsuitable cleaning
agents can cause discolouration on
all surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
^ Touch the On/Off sensor K to switch
the appliance off.
^ Clean the appliance casing with a
clean, soft sponge or cloth, a solution
of warm water and washing-up liquid.
Then dry all parts with a soft cloth.
Tip: You can also clean the machine
front with the Original Miele all purpose
microfibre cloth.
53