DIVAR 2000 / DIVAR 3000 / DIVAR
5000
9
Web Client Software
9.1
Getting started
9.2
How to log on
1. Open your web browser and enter the IP address for the DIVAR in the address column.
For example, if your DVR IP is 10.10.3.16, then enter http:// 10.10.3.16
2. If Web Client is already installed, the following Login screen is shown (if Web Client is not
installed, check with your administrator for how to do this):
3. Input your user name and password.
4. Select the login mode: LAN or WAN (LAN is for smaller networks; WAN is best for larger
networks and the internet – the differences are described in the following pages).
5.
Click <Login> to access the Web Client 'Live' window – see below.
Note 1: A disclaimer screen may initially appear (click <Accept> to continue).
Note 2: For security reasons, your password must be defined after you first login.
Note 3: If the maximum number of users for the Web Client is exceeded, a message is
displayed.
9.3
Web client live window
9.3.1
Playback mode
9.3.2
Event search
Click Event search to search and playback a selected event.
Choose here:
–
Type: Choose from All (default), Motion or Alarm
–
Channel: Choose All or specific channels
–
Start time: Choose start date and time for search
–
End time: Choose end date and time for search
Press <Search> to start the event search (all the events found will be listed in the table
below). If required, scroll to a particular page in the list of events.
To export the event file, press <Export> to export the file (a popup screen appears asking
where to export the file, and the file format). Assign the fields and press <Export> again).
Bosch Security Systems
Operation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Web Client Software | en
71
2016.09 | v1.0 | AM18-Q0717