Siemens SISTORE AX Installation Instructions Manual page 24

Installation and replacement of hard disk drives
24
Siemens Building Technologies
Fire Safety & Security Products
AX8/AX16 250/100 with extension HDD
above the primary HDD.
If the extension HDD shall be installed
above the DVD writer.
8. Fit the hard disk unit into the frame and
secure using the four supplied screws
(among accessories enclosed with the
SISTORE AX).
9. Connect the two cables –
1 x power supply (cable tie need to be
opened before),
1 x data
to the hard disk unit.
10. Now close the SISTORE AX with the
cover, and secure this by inserting and
tightening the previously removed
screws.
You can now start up the SISTORE AX.
The new hard disk capacity will be
displayed in the OSD menu "Storage
information". Before you can start
recording data, the use needs to be
defined and the hard disk to be formatted
(see SISTORE AX8/AX16 250/100 User
Manual).
03.2009