Connecting Wires To Terminals - Kenwood KDC-122 Instruction Manual

Connecting Wires to Terminals

If no connections are made, do not let the wire come out from the tab.
6 Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
Ignition key
switch
10
Car fuse box
(Main fuse)
11
–
+
Battery
Front left output (White) (KDC-2022/2022V/202MR only)
Front right output (Red) (KDC-2022/2022V/202MR only)
2 KENWOOD disc changer control input (KDC-2022/2022V/202MR only)
To connect the Disc changer, consult
your Disc changer manual.
Not Used 19
ANT.
Do not let the wire come
out from the tab. 4b
ACC 13
Car fuse
box 14
Ground wire (Black) · (To car chassis)
12
3
Fuse (10A) 24
4
Wiring harness
(Accessory1)25
P.CONT
Power control/Motor antenna
control wire (Blue/White)
16
CONT.
Ignition wire (Red)
Battery wire (Yellow)
— 17 —
26
27
REAR
L
R
29
White/Black
FRONT • L
White
31
32
Gray/Black
FRONT • R
Gray
34
35
Green/Black
REAR • L
Green
37
38
Purple/Black
REAR • R
20
Purple
40
21
22
Rear left output (White) 23
Rear right output (Red) 28
FM/AM antenna input 1
To front left
speaker 30
To front right
speaker 33
To rear left
speaker 36
To rear right
speaker 39