Miele KM 3034 Operating And Installation Instructions page 31

Cleaning
Ceramic surface Remove all large soiling with a damp cloth and use
a glass scraper at a 90° angle to remove stubborn
soiling.
Then clean the cooktop with the Original Miele
ceramic and stainless steel cooktop cleaner (see
"Optional accessories"), applied with kitchen paper
or a clean cloth.
Do not apply the cleaner while the cooktop is still
hot as spots may appear.
After cleaning, wipe the cooktop surface with a
damp cloth and dry with a soft cloth.
Pan supports Remove the pan supports.
Clean in a dishwasher or use a sponge and a little
washing-up liquid with warm water.
If necessary, the reverse side of a non-scratching
washing-up sponge can be used.
Control knobs Clean with a microfibre cloth or with a solution of
warm water and a little washing-up liquid applied
with a soft sponge.
Burners All removable parts should be removed.
Then clean these by hand using a solution of warm
water and a little washing-up liquid applied with a
soft sponge.
Parts of the burner that cannot be removed should
be wiped clean with a damp cloth only.
Ignitor Wipe carefully with a well wrung out cloth.
Ignition safety
device
Cleaning and care
Notes
Using washing-up liquid will
not remove all soiling and
an invisible film will be left
behind which will result in a
permanent discolouration of
the ceramic surface.
When using ceramic
cooktop cleaning agents,
please follow the
instructions on the
packaging.
Not dishwasher safe.
Not dishwasher safe.
Make sure that the flame
slits are clean and
completely dry.
Do not let the ignitor get
wet. If it gets wet, it will not
spark.
31