Ipv6 Firewall - Samsung CY-SWR1100 User Manual

On this page, you can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used to
allow or deny traffic from passing through the device. It works in the same way as IP Filters, but with additional settings. You
can create more detailed rules for the device.
In the IPv6 Firewall rules section you can create, enable and disable IPv6 firewall rules used by this device.
You can configure the following parameters:
Configure IPv6 Filtering:
Checkbox:
Name:
Source Interface:
Destination Interface:
Schedule:
IP Address Range:
Protocol:
Port Range:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
IP
v
This option defines the behaviour of all the IPv6 firewall rules created. Choose 'Turn IPv6
Filtering OFF', 'Turn IPv6 Filtering ON and ALLOW rules listed', or 'Turn IPv6
Filtering ON and DENY rules listed'. Select the appropriate option used here.
Check this option to use the firewall rules created.
Enter a custom firewall rule name here. This name is used for identification.
Select the source interface used here.
Select the destination interface used here.
Select a time schedule that will be applied to this rules here.
Enter the IPv6 address range used here.
Select the protocol used for this rule here. Choose ALL, TCP, UDP, or ICMP.
Enter the port range used for this rule here.
' m
S anual
6 f
IreWall
P 74
age