Samsung CY-SWR1100 User Manual page 21

Internet Connection Type: Static IP
Select Static IP from the drop-down menu if all the Internet IP information provided to you by your ISP was in a written,
printed, or verbal form. You will need to key in the IP address, subnet mask, gateway address, and DNS address(es) provided
to you by your ISP in the fields provided. Each IP address entered in the fields must be in the appropriate IP form, which is
four octets separated by a dot (1111.2222.3333.4444). The Router will not accept an address if it is not in this format.
You can configure the following parameters:
IP Address:
Subnet Mask:
Gateway Address:
Primary DNS Address:
Secondary DNS Address:
MTU:
MAC Address:
Click the Save Settings button to accept the changes.
Click the Don't Save Settings button to discard the changes.
S W r u
amSung ireleSS outer Ser
Enter the Static IP address provided by the ISP here.
Enter the Subnet Mask provided by the ISP here.
Enter the Gateway IP address provided by the ISP here.
Enter the Primary DNS IP address here.
Enter the Secondary DNS IP address here. This field is normally optional. Only one DNS
address is required for a functional Internet connection, but using a second DNS address
provides more stability.
Maximum Transmission Unit. You may need to change the MTU for optimal performance
with your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet port's physical interface MAC address on
the Broadband Router. We recommend you leave it unchanged unless your are required
to change it by your ISP. You can use the Clone Your PC's MAC Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
' m
S anual
P 21
age