Samsung CY-SWR1100 User Manual page 16

Dynamic IP Address Connection
After you select Dynamic IP Address, the following page appears:
Parameter
Instructions
MAC Address: If you know the MAC address of your Internet gateway, enter it here. This is the MAC address of the
device through which the router will access the Internet. If you're not sure, leave the MAC Address
field blank.
Host Name: Enter the Host Name here. The Host Name is the name assigned to your computer by your Internet
Service Provider (ISP). If you do not know this information, please contact your ISP.
The page also has a Clone Button. If the configuration PC - the PC connected to the router - also acts as the Internet gateway,
then Click the Clone Your PC's MAC Address button to copy the PC's MAC address into the space provided. If you're not
sure, leave the MAC Address field blank.
Click Next to continue to Step 4 and go to page 19.
Click the Cancel button to discard the changes and return to the Internet home page.
PPPoE Connection
After you select PPPoE, the following page appears:
Parameter Instructions
Address Mode: You must select either Dynamic or Static IP address from the Address Mode drop down list. PPPoE
usually requires a Dynamic IP address.
IP Address: If you selected Static Address, enter the PPPoE IP address here. This option is only available if you
selected Static IP.
User Name: Enter your PPPoE account user name here.
Password: Enter your PPPoE account password here.
Verify Password: Re-enter your PPPoE account password here.
Service Name: This optional field lets you enter a service name to identify this Internet connection.
Click Next to continue to Step 4 and go to page 19.
Click the Cancel button to discard the changes and return to the Internet home page.
S W r u
amSung ireleSS outer
' m
Ser S anual
P 16
age