3.
Connect the wires from the terminal box to the screws located in the front cover.
To the terminal box
(See the next page.)
4.
Secure both halves together and re-install the screw.
Wiring of the Doorphone
1.
Connect the DPH Card to the terminal box using a 4-conductor modular connector.
2.
Connect the wires of doorphone 1 to the red and green screws of the terminal box 1.
3.
Connect the wires of doorphone 2 to the yellow and black screws of the terminal box 1.
4.
Connect the wires of doorphone 3 to the red and green screws of the terminal box 2.
5.
Connect the wires of doorphone 4 to the yellow and black screws of the terminal box 2.
Installation
...........When the doorphone plate has been
fixed to the wall.
...........When you wish to install the
doorphone directly to the wall.
2.7 Other Cards
Figure 98:
Figure 99:
131