OHCA card
Note
• Two extensions are available for the OHCA function with one OHCA card. See "Wiring
Table" in 2.7.2 OHCA Card (KX-T96136).
• The OHCA function for APT is only provided with the following APTs
:KX-T123235, KX-T123230D or KX-T7130.
Connection to the PLC card (KX-T96172)
1.
Make sure that the extensions which use OHCA function have OHCA cards.
2.
Insert the connector (plug) on the OHCA card into the connector (jack) on the PLC card.
3.
Install the PLC card to a free slot. See .
Installation
HLC card
2.7 Other Cards
9-pin connector
(plug)
5-pin connector
(plug)
4-pin connector
(plug)
9-pin connector
(jack)
5-pin connector
(jack)
4-pin connector
(jack)
Figure 91:
125