Table of Contents
Advertisement
Reference: STB-2000 Jack Panels
When the STB is in Pass-through Mode, the MPI
function enables an external MPI control device
(i.e., VOD/PPV STB, etc.) to control the STB.
(RJ-12 port) Use MPI/MTI cable provided to
connect to LG Hospitality display panel's MPI
port or commercial non-LG display panel's
STB-2000 LED
STB-2000 Front Panel
STB-2000 Rear Panel
Use HDMI cable (provided) to connect
to display panel HDMI input.
Use for video IP and/or network connections.
Use for amps and home theater systems. Note:
When the STB is OFF, this port is not enabled.
(3.5 mm jack) Connect audio equipment to use fixed line
level audio output. See Reference section, "External
Audio Line Out Specifications," for further information.
(3.5 mm jack) Connect composite audio/
video output from external device. Use A/V
* Only one DISPLAY CONTROL connection should be used depending on the type of display panel
to be controlled. Refer to "STB-2000 Cabling Connections" on pages 7 to 8, and/or see Reference
section, "Display Panel Specifications," for information on determining the appropriate connection.
76
MPI
DISPLAY CONTROL 2
MTI (DATA) port. *
DISPLAY
MPI
CONTROL 2
OUT
LAN
HDMI OUT
LAN
DIGITAL AUDIO
AUDIO LINE OUT
AV (AUDIO/VIDEO) IN
adapter cable provided.
HDMI IN 2 & 1
Connections for HDMI output
from external devices.
USB 2 & 1
Insert USB memory device for software updates,
cloning purposes, FTG Mode via CPU configuration,
picture/music entertainment, etc., as applicable.
USB IN 1
IN 2
IN 1
DIGITAL
AUDIO
DISPLAY
AUDIO
POWER
AV IN
SERVICE
IR IN
CONTROL 1
LINE OUT
POWER (DC IN)
Use 19V
power adapter (provided).
DISPLAY CONTROL 1
(3.5 mm jack) Use TLM cable provided to connect
to LG Public Display/Commercial Monitor display
panel's RS-232 connector. *
IR IN
(3.5 mm jack) Connection for external IR receiver
(optional). Use when IR pass-through via RS-232
connector is not supported by the LG display panel.
See Reference section, "External IR Receiver
Specifications," for further information.
SERVICE
Restricted to service updates.
USB IN 2
ANTENNA/
CABLE IN
ANTENNA/CABLE IN
Connect to Antenna/CATV.
2.1A
AC/DC
206-4256
Advertisement
Table of Contents
