Selecting The Traffic Information Type; Traffic Information Settings - Sony nav-u Quick Start Manual

Selecting the traffic information type
all traffic messages on the current route
, :
~-
:To .how
On Route
You can select the traffic information type to display.
1
Open the list of traffic messages.
For details, see "Viewing traffic messages" on page 38.
2
Select "Change Message."
The type selection display appears.
3
Select the desired type.
'Select·
Not on Route all traffic messages not on the current route
4
Touch,
'!:l ','
The message list of selected information type appears.
Traffic information settings
The following traffic information settings are configurable.
In the menu display, touch
m.
~
"Traffic Information"
~
"Settings"
~
the desired item
~
the
desired option.
Status Information
Checks the name, frequency, and reception
level of the current TMC station.
Recalculate Route* Calculates an alternative route automatically
to avoid a new traffic event when detected on
the current route: "ON," "OFF."
Indication in the Map
Shows the following indications on the map:
"ON," "OFF."
- "Traffic Control Point"
- "Traffic Control Section"
Activate TMC Service
Activates the Pay-TMC-Services.
Select "Activate," then enter the activation
code.
*
Applicable only when "Traffic Information" is set to "Use" in the route profile setting (page 74).
39