Samsung OfficeServ 7100 Technical Manual page 198

OfficeServ 7100
TECHNICAL MANUAL
KMMC LOCKOUT TIMER
LCR ADVANCE TIME
LCR INTER DIGIT
LONG KEY DETECT
LONG KEY REPEAT
MS LED ON TIME
OFF HOOK RING INTERVAL
OHVA ANSWER TIME
PAGE TIME OUT
PAGE TONE TIME
PARK RECALL TIME
AP-MMC LOCK OUT
PERI-UCD REPORT
POWER DOWN TIME
RECALL DISCONNECT
MMC: 501
This timer controls
programming actions while in a programming session.
The timer automatically returns the system to secure
programming status.
This timer controls the duration of time before selecting the
next allowable route when a station is allowed to route
advance.
This timer controls the grace period between dialing valid
digits before accessing a trunk.
This timer controls the time a key must be held down before
the key press is repeated.
This timer controls the time between repeated digits on a
long key press.
This timer controls the duration a Manual Signalling key will
remain on after use.
This timer controls the duration of time between ring
bursts to a user who has a camped-on call.
This timer controls the time duration of an OHVA call before
automatic rejection.
This timer controls the duration of a page announcement.
This timer controls the duration of tone burst heard over the
page prior to the page announcement.
This timer controls the duration of time a call is parked
before recalling to the call park originator.
This timer monitors the Installation Tool activity, drops the
link if no action is created by Installation Tool and returns
the system back to secure program status.
This timer is the interval that a periodic UCD report is output.
This timer monitors the power to the ROM pack to begin
shutdown status.
This is the time an attendant recall will ring before being
disconnected.
Home Page
PROGRAMMING
PART 2 MAY 2009
the grace period
Table of Contents
between