Samsung OfficeServ 7100 Technical Manual page 137

OfficeServ 7100
TECHNICAL MANUAL
MMC: 320
DESCRIPTION:
This program allows the technician to program branch group for each station. Each
station can be in only one branch group. Branch groups enable the user to pick up
the incoming call of another station in the same branch group just by lifting the
handset. There are a maximum of 20 branch groups.
PROGRAM KEYS
UP & DOWN Used to scroll through options/move cursor left or right
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRANSFER 320
Display shows
2. Press the station number (e.g. 205)
OR
Press VOLUME to select the station, and press the
RIGHT soft button to move the cursor
OR
Press MESSAGE to set the entire stations.
3. Enter the branch group number ([01]-[20])
OR
Press VOLUME to select pick-up group number,
and press the RIGHT soft button to repeat this
procedure from step 2.
4. Press TRANSFER to exit the program
OR
Press SPEAKER to move on to the next program.
DEFAULT DATA: BRANCH GRP: NONE
RELATED ITEMS: NONE
Home Page
SET BRANCH GROUP
DISPLAY
[201] BRANCH GRP
BRANCH GRP:NONE
[205] BRANCH GRP
BRANCH GRP:NONE
[ALL] BRANCH GRP
BRANCH GRP:??
[205] BRANCH GRP
BRANCH GRP:10
Table of Contents
PROGRAMMING
PART 2 APRIL 2007