10/100 IP Address Menu
Use the following procedure to set and view the IP address for the left Ethernet port on
the back panel of the DSR-6100. Press the buttons until the IP Address menu
appears. Use this menu to enter an IP address for the Ethernet port. The address is
represented in the common dotted-decimal format. Contact the network administrator
for details about configuring the Ethernet port for operation on your local network.
Important: Do not configure the IP Address of the 10/100 and GigE to be on the
same subnet.
Press the 4 button until the cursor is at the IP Address label, and press the ENTER
button to move into the field. Use the arrow buttons ( 4 ) to enter the desired
address and then press ENTER to confirm the selection and exit the field.
10/100 Subnet Mask Menu
Use the following procedure to set and view the Subnet Mask address for the left
Ethernet port on the back panel of the DSR-6100. Press the buttons until the
Subnet Mask menu appears. The subnet mask is represented in the common dotted-
decimal format. Contact the network administrator for details about configuring the
Ethernet port for operation on your local network.
Press the 4 button until the cursor is at the Subnet Mask label, and press the ENTER
button to move into the field. Use the arrow button ( 4 ) to enter the desired
address and then press the ENTER button to confirm the selection and exit the field.
DSR-6100
PORT 10/100
IP Address
E
192.168.000.100
PORT 10/100
Subnet Mask
E
255.255.255.000
Default: 192.168.000.100
Default: 255.255.255.000
49