Panasonic KX-UDS124 Installation Manual page 50

4 Deployment Procedure
4.
Click Start Tree Survey.
5.
Click OK.
6.
After the Tree Survey has completed, results will be displayed.
7.
Click OK.
Note
Click Tree Image to see a connection diagram of the SIP-CSs
Notice
If the Tree Survey will be conducted for 10 or more SIP-CSs, use the CS Maintenance Tool instead. For
details, see "4. Tree Survey" in "4.1 Overview".
Note
If necessary, you can relocate SIP-CSs and conduct the Tree Survey again.
Applying the Tree Survey Results
Follow the procedure below to apply the parent-child settings from Tree Survey results to the registered
SIP-CSs.
1.
Click Apply.
2.
Click OK.
Note
•
After clicking OK, all SIP-CSs will restart.
•
If you do not want to apply the Tree Survey results, click Cancel to exit Tree Survey mode. After
clicking Cancel, all SIP-CSs will restart.
Manually adding a SIP-CS at the End of the Connection Tree
You can add SIP-CSs at the end of the connection diagram manually. This is useful when you want to expand
the SIP-CS coverage area.
1.
Register a SIP-CS to the Air Sync Group for which you want to extend the SIP-CS coverage area.
2.
Log in to the Super Master CS.
3.
In the System tab, select Tree Survey.
4.
Select an Air Sync Group.
5.
The SIP-CS registered in step 1 is shown at the bottom of the Survey List. Enter the SIP-CS index number
of the SIP-CS that you want to specify as a Primary CS in Primary CS Index for the registered SIP-CS.
6.
Click Apply.
7.
Click OK.
Note
•
You cannot add a SIP-CS at the end of level 8.
•
When you want to add SIP-CSs to the middle of the connection diagram, please conduct the Tree
Survey again.
•
When you want to change the Secondary CS, change CS Class, click Apply and then click OK.
50 Installation Guide