Siemens ROLMphone 120 Series User Manual page 72

To clear a DSS
key on a display
phone
Note: You cannot clear a DSS key on a non-display phone or any
phone without a Clear key, though you can set it up to dial a
different extension.
3-14 ROLMphone 120/240/400 Series User Guide
If you want to set up another DSS key,
press the Store key. If you have a display
phone, STORED is displayed. Repeat the
two previous steps.
To end setup, press the Program key. The
Program status light turns off, and
STORED is displayed if you have a display
phone.
On your faceplate, use a pencil to label
each DSS key you changed with the name
or extension of the person it dials.
Press the Program key. The Program status
light turns on, and PRESS FEATURE
KEY OR DIAL CODE is displayed.
Press the DSS (D-) key you want to clear.
DIRECT STATION SELECT is displayed,
followed by the stored extension.
Before NEW NUMBER? is displayed,
press the Clear key. DELETED is
displayed.
If you want to clear another D-key, repeat
the previous two steps.
To end setup, press the Program key. The
Program status light turns off.
On your faceplate, erase the label next to
each D-key you have cleared.