Chapter 6 Blocking Calls; Do Not Disturb - Siemens ROLMphone 120 Series User Manual

Chapter 6
Calls

Do Not Disturb

The Do Not Disturb feature lets you temporarily block incoming calls
to your phone. Although incoming calls will not then ring at your
phone, you can continue to make calls. Callers to your extension will
hear the same sounds they would if your phone were ringing. If callers
have display phones, their phones will display DO NOT DISTURB.
If a Fixed Forwarding Do Not Disturb forwarding target has been set
up for your extension, a call to your extension will be forwarded to that
target. (See "Forwarding" on page 5-1.)
To block incom-
ing calls
To allow incom-
ing calls
Note: If your extension appears on another phone (a multiple line
appearance configured to ring), that phone must also be in Do
Not Disturb mode for your extension to be in Do Not Disturb
mode. If the other phone is not in Do Not Disturb mode, calls
to your extension will continue to ring at the other phone.
The following features override Do Not Disturb mode:
Bridged Call, Buzz, Com Group Call (on Version 6.2 and
higher), Intercom Call, and Speaker Calls (except Two-Way
Speaker Call).
Blocking
Press the Do Not Disturb (DND) key. The
DND status light turns on.
Press DND. The DND status light turns off.
Blocking Calls 6-1