A Appendix; Event Memory; A.1 Event Memory - Bosch FPC-500-2 Operation Manual

Conventional Fire Panel
A Appendix
A.1

Event Memory

Message
Drill/Evacuate
Zone # Alarm
Zone # PreAlarm
Zone # Open
Zone # Short
Zone # Normal
Zone # Disabled
Zone # Enabled
Input # Open
Input # Short
Input # Normal
Aux Power Short
Aux Power Normal
NAC # Open
NAC # Short
NAC # Normal
NAC Enabled
NAC Disabled
Relays Enabled
Relays Disabled
Battery Fault
Battery Restore
Mains Fault
Mains Restore
Ext PS Fault
Ext PS Normal
Ext BATT Fault
Ext BATT Normal
Sys Load Fault
Sys Load Normal
System Fault
Panel boot-up
Reset Panel
Bosch Sicherheitssysteme GmbH
Meaning
A manual alarm has been triggered on the panel.
Zone # has triggered an alarm.
Zone # has triggered a pre-alarm.
Zone # is interrupted.
Zone # has a short-circuit.
Zone # is in the normal state. (Fault or alarm
eliminated)
Zone # is disabled.
Zone # was enabled.
Input # interrupted.
Input # short-circuit.
Input # normal.
Short-circuit in the AUX power supply
Fault in the AUX power supply rectified.
Notification appliance #, line interrupted
Notification appliance #, short-circuit on line.
Notification appliance # normal. (Fault was
eliminated)
Notification appliances re-enabled.
Notification appliances disabled.
Relays re-enabled.
Relays disabled.
Fault in the battery power supply.
Battery power supply was restored.
Fault in the 230 V power supply.
230 V power supply was restored.
Fault in external power supply unit.
Fault in external power supply unit resolved.
Fault in external battery.
Fault in external battery resolved.
Current consumption of panel and all connected
peripherals is above 3.5 A.
Current consumption is back in permitted range.
System fault
Panel has been restarted.
Panel has been reset.
Operation Guide
| en
F.01U.172.982 | 5.0 | 2012.04
29