Conventional Fire Panel
Press the "Menu" key and then zone key 2.
i
2
This takes you to the History submenu.
Press zone key 2.
2
The messages in the test memory are displayed.
You can use the arrow keys to switch between the individual
entries. If you press and hold an arrow key, the display moves
10 steps in the corresponding direction. A description of the
displayed events can be found on Page 30.
If the test log should be disabled, "No Entry" appears on the
LCD.
Displaying alarm counters
Call up the menu; see Section Opening the menu, page 15
Press the "Menu" key and then zone key 3.
i
3
The LCD shows the number of alarms since the initial start-up.
The alarm counter cannot be deleted. It only counts alarms
triggered by zones up to 999. It does not count pre-alarms or
evacuations triggered manually via the panel or the inputs.
Displaying SW Release
Call up the menu; see Page 15.
Press the "Menu" key and then zone key 4.
i
4
This takes you to the System Info submenu.
Press zone key 1.
1
The software version is displayed.
Displaying the operation days
Call up the menu; see Section Opening the menu, page 15
Press the "Menu" key and then zone key 4.
i
4
This takes you to the System Info submenu.
Press zone key 2.
2
The number of operation days is displayed
Bosch Sicherheitssysteme GmbH
Operation Guide
Operation | en
F.01U.172.982 | 5.0 | 2012.04
17