Table of Contents
Advertisement
If in doubt, look it up
CUTIN (! p. 140) -
If you want to talk to a subscriber before he has finished an ongoing call,
you can cut in on the existing call.
–
Decrease volume/contrast
Using this function you can change the volume during a call and also the
volume of the loudspeaker provided it has been switched on.
In the idle state of the telephone this softkey takes you to the menu "Adjust
volume and contrast".
On putting your telephone into operation, this function is already program-
med on a softkey. You can change this setting at any time.
Display call list (! p. 28)
LIST
All incoming calls that you did not answer are listed in the call list.
Door device -
DOOR
You can activate and deactivate a door device by a single keystroke. You
can use this function only if it has been enabled for your telephone and if a
door device is connected.
Enable function key (! p. 71)
Erase the current assignment of the function key.
–
Increase volume/contrast
Using this function you can change the volume during a call and also the
volume of the loudspeaker provided it has been switched on.
In the idle state of the telephone this softkey takes you to the menu "Adjust
volume and contrast".
On putting your telephone into operation, this function is already program-
med on a softkey. You can change this setting at any time.
Individual emergency destination (! p. 62)
EMER
You can dial your personal emergency number at any time, even if the
phone is protected against unauthorized use (lock). Your personal emer-
gency number is stored in the telephone book.
Interchange (! p. 46)
Toggle between the first caller and an additional caller.
102
Telephone functions overview "
Hide quick links:
Advertisement
Table of Contents
