Bosch 2600 Series Instruction Manual page 17

LTC 2600 Series | Instruction Manual | Multiplexer Set (MS) Commands
mode = 0
Full Screen Mode
1
mode = 1
2 x 2 Mode
1 2
3 4
mode = 3
4 + 3 Mode
3
1 2
4 5
6 7
mode = 5
4 x 4 Mode
1 2 3 4
5 6 7 8
9 10 11 12
1314 1516
MS-MON-BORDERS <brightness>
This command specifies the border brightness for
cameos shown on monitor A during multi-screen
displays.
Parameter values for <brightness> are:
0 Transparent
1 Black
2-6 Grey*
7 White
*NOTE: All grey values (2-6) will set an identical grey
value which will be returned as 2.
MS-MON-LARGE-TEXT <text-bright>
<background-bright>
MS-MON-SMALL-TEXT <text-bright> <background-
bright>
Bosch Security Systems | July 12, 2004
mode = 2
3 x 3 Mode
1 2 3
4 5 6
7 8 9
mode = 4
12 + 1 Mode
1 2 3 4
5 6 7 8
1011
9
1213
mode = 6
6 + 2 Mode
1 2
3 4
5 6 7 8
9 10
This command specifies the text brightness and
background outline brightness (whether large or small)
for Parameter values for <text-bright> and
<background-bright> are:
Transparent
Black
Grey
White
MS-MON-TEXT <brightness> <brightness>
This command sets the foreground and background
brightness (respectively) for all text on all monitors.
Parameter values for <brightness> are:
0 Transparent
1 Black
1 Grey
2 7 White
MS-MON-TEXT-ENABLE <monitor> <boolean>
This command enables or disables text display for the
specified monitor.
Parameter values for <monitor> and <boolean> are:
<monitor> 1
2
<boolean> 0
1
MS-MON-TIME-DATE-FORMAT <time-format>
<date-format>
This command sets the formats for the time and date
displayed on the monitor.
NOTE: The time and date formats can also be set
using the DATE/TIME General commands.
Parameter values for <time-format> and <date-format>
are:
<time-format> 12
24
<date-format> 1
2
3
EN | 17
1
1
2
8
Monitor A
Monitor B
Disables
Enables
12 hr. mode
24 hr. mode
MM DD YY
DD MM YY
YY MM DD