Using The Remote Control - HP ExpressCard Analog Hardware Setup Manual

Table of Contents

Advertisement

Using the remote control

To use the remote control:
1. Be sure the remote control batteries are installed. Refer to
"Replacing the remote control
2. Be sure the remote sensor is connected to the computer. Refer
to Chapter 3,
3. Point the remote control at the remote sensor.
Use the remote control at a maximum distance of 8 m (26 ft)
from the remote sensor and at a maximum of 22.5 degrees
(45 degrees total) off center of the remote sensor.
Hardware Setup
"TV tuner
The remote sensor should be located in a convenient place.
Be sure that nothing blocks the path between your remote
control and the remote sensor.
batteries" for details.
setup," for details.
Remote control
5–7

Advertisement

Table of Contents
loading

Table of Contents