HP ExpressCard Analog Hardware Setup Manual page 13

Connection 1: Connecting with regular TV or
cable TV without a set-top box
✎
Computer features may vary. Cable lengths are not shown to
scale.
To connect the TV tuner to your existing regular TV or cable TV
source (without a set-top box):
1. Insert the TV tuner 1 into the ExpressCard slot on the
computer.
2. Connect the RF coaxial cable attachment 2 to the TV tuner.
3. Connect an RF coaxial cable from the RF coaxial cable
attachment on the TV tuner 3 to your regular TV or cable TV
wall jack 4.
Hardware Setup
TV tuner setup
3–3