Code Calling - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
. . . or . . .
Press the CAMP soft key and
listen for success tone.
2. Hang up to transfer the held
call.
To Place a Code Call:
1. Press the CONF/TRNS key to
place any current caller on
"soft hold."
2. Press the Code Calling (CC)
access key.
. . . or . . .
Enter the Code Calling
access code, plus the desired
code call paging zone number.
3. Enter the desired code call
identity code.
4-24
The formerly-held call will now be camped-on to the busy line.
When the line becomes idle, the held party will hear ringback tone. Once
the party answers, the call will proceed as a normal call.
NOTES:
1. Prior to hanging up, you can return to the held call at any time by
pressing the Release (RLS) key.
2. The Camp-on Transfer feature is not available if the held party has
another party on hold, or if the held party is involved in a conference.
3. If the held call is camped-on to the busy line longer than allowed by
the predetermined timeout period, the held call will recall to your
station.

CODE CALLING

You can page an individual via a Code Calling chime or bell, if your
system is equipped for this operation. Such pages will be broadcast
throughout designated zone areas via special code calling equipment.
You can page the party to pick up another held call, or to pick up your
call.
This will hold the call until retrieved by the paged party. A code call can
also be placed from an idle telephone.
Listen for recall dial tone.
PERCEPTION 4000 HDT2020SD digital telephones will display Code
Calling access.
If the Code Calling circuit is busy, you can connect to the held call by
pressing the Release (RLS) key.
If the code is accepted, you will hear success tone.
FEATURE OPERATION