Toshiba PERCEPTION 4000 User Manual page 33

PERCEPTION 4000
To Enter an Authorization Code
from an Idle Station:
1. Take the station off-hook.
2. Press the Authorization Code
(AUTH) access key or enter
the Authorization Code
access code.
3. Enter the desired authorization
code.
4. Dial the destination call
number or desired feature
access code.
To Enter an Authorization Code
from a Station Involved in a Call:
1. Press the CONF/TRNS key.
2. Press the AUTH key or dial
the Authorization Code
access code.
3. Enter the desired authorization
code.
4. Dial the destination number or
desired feature access code.
duration of the call, after which the station's original calling restrictions
will be restored. Authorization codes can be entered from either an idle
station or a station involved in a call.
Listen for dial tone.
Listen for recall dial tone. HDT2020SD telephones will display "AUTH
CODE."
Listen for dial tone. If an invalid authorization code is entered, dial tone
will sound, but the station's original calling restrictions will not be altered.
The entered authorization code will be applied to the dialed number or
feature.
Your current caller will be placed on "soft hold." Listen for recall dial tone.
Listen for recall dial tone.
Listen for dial tone. If an invalid authorization code is entered, dial tone
will sound, but the station's original calling restrictions will not be altered.
NOTES:
1. PERCEPTION 4000 HDT2020SD digital telephones will display
"AUTH CODE" after pressing the AUTH key or entering the
Authorization Code access code. The telephone will not display the
authorization code itself when the code is entered.
2. Authorization code allowances will remain in effect for the duration of
the call. Once an authorization code has been applied to a line, no
other authorization codes can be applied to the line or any of the
station's other line appearances, until the call is completed.
FEATURE OPERATION
4-5