Toshiba PERCEPTION 4000 User Manual page 38

PERCEPTION 4000
3. Place your telephone on-hook
(if off-hook).
To Program a Preregistered Call
Forward Key:
1. Press the Program Mode
(PRGM) access key.
2. Press the Preregistered Call
Forward (PRCF) access key
that you want to program.
3. Press the desired Call
Forward access key (CFAC,
CFNA, or CFBN).
. . . or . . .
Enter the desired Call
Forward access code.
4. Dial the digits of the desired
number to be programmed on
the PRCF key.
5. To program another PRCF
key, follow steps 2 ~ 4.
6. When all PRCF keys are
programmed, press the PRGM
key.
To Forward Calls via a
Preregistered Call Forward Key:
1. Press the desired PRCF key.
4-10
Display telephones will indicate the type of Call Forward registered
(CFAC, CFNA, CFBN), along with the name and number of the
forwarded-to destination.
Any incoming calls will now be treated as defined by the registered type
of Call Forward.
The PRGM LED will light solid green.
The PRCF LED will flash green.
The PRCF key will be programmed as the designated type of Call
Forward key.
When dialing an off-premises number, include any desired trunk access
code or Least Cost Routing (LCR) access code. (See Notes 2 and 3.)
PERCEPTION 4000 HDT2020SD digital telephones will display the
dialed digits.
Your telephone will be taken out of Program Mode.
The PRCF key can be pressed while your telephone is either idle or in a
talk state.
The PRCF LED will light solid green.
FEATURE OPERATION