Other Functions; Changing The Sound Settings; Customizing The Equalizer Curve -Eq3 - Sony CDX-M60UI Operating Instructions Manual

-
16
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
3
Press ~ (BACK).
The setting is complete and the display
returns to normal play/reception mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types.
DSO (Dynamic Soundstage Organizer)
Creates a more ambient sound field.
To select the DSO mode: "I," "2," "3" or "OFF."
The larger the number, the more enhanced the
effect.
LOW*1, MID*1, HI*l (page 16)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD
(Fader)
Adjusts the relative level between the front and
rear speakers.
SUB (Subwoofer volume)
Adjusts the subwoofer volume.
AUX
(AUX level)*2
Adjusts the volume level for each connected
auxiliary equipment: "+18 dB" - "0 dB" - "-8
dB."
This setting negates the need to adjust the
volume level between sources.
*
1
When EQ3 is activated.
*2 When AUX source is activated.
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button repeatedly to select "EQ3."
2
Rotate the control dial to select
"CUSTOM."
3
Press the select button repeatedly
until "LOW;' "MID" or "HI" appears.
4
Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from -10 dB to
+
10 dB.
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
S
Press ~ (BACK).
The setting is complete and the display
returns to normal playlreception mode.
Tip
Other equalizer types are also adjustable.