Status Messages
and DND
IPedge UG
01/13
Status messages is available under the DND Off option.
Setting a Status Message
1. Click the
window. The following screen displays.
2. Change the selection to Status Msg Only On
3. Use the pull down listing and select a Status Message.
4. When needed enter additional information on the Custom 2nd Line.
5. Click the Save button when done. The status message will appear on the
DSS keys throughout the system.
Turning Off DND or Message Only
1. Click the
2. Click the Msg Off radio button to remove the Status Message.
TOSHIBA
button to bring up the Set Status Message
button to bring up the or Status Message window.
129