D-Link DIR-868L User Manual page 71

Section 3 - Coniguration
My IPv6 Select PPPoE from the drop-down menu.
Connection Is:
PPPoE Session:
Enter the PPPoE account settings supplied by your Internet provider.
Address Mode: Select Static if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic.
IP Address: Enter the IP address (Static PPPoE only).
User Name:
Enter your PPPoE user name.
Password: Enter your PPPoE password and retype the password in the next box.
Service Name: Enter the ISP Service Name (optional).
Reconnect Mode:
Select either Always-on, On-Demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection is
Time: maintained during inactivity.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your speciic ISP. 1492 is the default MTU.
IPv6 DNS Settings:
Select either Obtain DNS server address automatically or Use the following DNS Address.
Primary/Secondary
Enter the primary and secondary DNS server addresses.
DNS Address:
Enable DHCP-D: Check this box to enable DHCP preix delegation for each LAN on the network.
D-Link DIR-868L User Manual
PPPoE
67