11 Configure the settings relating to images and audio [Image/Audio]
•
On (Max X432)
optical zoom (up to 36x) and the electronic zoom (higher zoom factors, up to 432x).
•
On (Max X864)
optical zoom (up to 72x) and the electronic zoom (higher zoom factors, up to 864x).
•
Off: Does not use the digital zoom.
•
Default: Off
Note
:
SC384
•
When "On (Max X288)" is selected, digital zooming will stop when the zoom factor has reached 36x.
•
When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.
SW395
SC385
•
When "On (Max X432)" is selected, digital zooming will stop when the zoom factor has reached 36x.
•
When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.
SW396
SC386
•
When "On (Max X864)" is selected, digital zooming will stop when the zoom factor has reached 72x.
•
When the zoom factor is 72x or more, the setting of the preset positions will become unavailable.
[Pan-Tilt degree/Zoom ratio display]
Select "On" or "Off" to determine whether or not to display the current panning/tilting degree and the zoom ratio
display on images when the camera is being operated manually.
•
On: Displays the current panning/tilting degree and the zoom ratio display.
•
Off: Does not display the current panning/tilting degree and the zoom ratio display.
•
Default: On
Note
•
When "On" is selected, the panning/tilting degree and the zoom factor will be displayed at the position
selected for "OSD position" on the [Basic] tab of the "Basic" page. (®page 51)
[Camera position display]
When operating the camera manually, you can select what information to display in the image from the
following.
•
Off: Information is not displayed in the image.
•
Pan-Tilt degree/Zoom ratio display: The Pan-Tilt degree/Zoom ratio display is displayed.
•
Direction display: Direction display is displayed.
•
Default: Pan-Tilt degree/Zoom ratio display
Note
•
When "Pan-Tilt degree/Zoom ratio display" is selected, the Pan-Tilt degree/Zoom ratio display is
displayed in the position specified in "OSD position" on the [Basic] tab. (®page 51)
•
When "Direction display" is selected, the direction display is displayed in the position specified in "OSD
position" on the [Basic] tab. (®page 51)
[Tilt Angle]
Select the maximum degree for tilting from the following. (Level = 0°)
•
SW395
SC385
10°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°/ –20°/ –25°/ –30°
•
SW396
SC386
10°/ 5°/ 3°/ 0°/ –3°/ –5°/ –10°/ –15°
Default: 0°
92
Operating Instructions
: Images can be zoomed in on with the optical zoom (1x - 18x), extra
SW395
SC385
: Images can be zoomed in on with the optical zoom (1x - 36x), extra
SW396
SC386
:
:
SW396
SC386
SC384
SW395
SC385
SC384