Sharp IV-S30J User Manual page 43

(2) Manual measurement
With this function, you can measure distance between two points, the distance between X
coordinates, or the distance between Y coordinates that were selected manually on the operation
main screen.
Operation procedure
1. Select " EXTENSION FUNC." on the
"TYPE RUN COND" menu using the up
and down arrow keys. Then press the SET
key.
2. Select "MANL-MEAS" on the popup menu
and press the SET key.
3. Move the cursor to the upper function menu
by pressing the TRG/BRT key and select
"SCREEN." Then press the SET key.
Select "OPS-MENU" on the popup menu
and return to the operation screen.
4. Move the cursor to the "MNU-CHG"
(menu change) item on the bottom
of the operation screen and press
the SET key to change the bottom
menu display. Move the cursor to
"MANL-MEAS" (manual
measurement) and press the SET
key.
5. The menu items for manual
measurements will appear on the
screen.
6. Select " CURSOR1-COORD" or "
CURSOR2-COORD" and press
the SET key.
7. Move cursor 1 or cursor 2 using the
up/down/left/right keys. (They move
one pixel at a time.)
The distance between the two
points, and between the X
coordinates and Y coordinates for
the two points, will change on real
time basis.
8. After the positions of the points are determined, press the SET key.
9. When the operation is complete, press the ESC key.
The manual measurement menu items will disappear.
Setting the Operating and System Conditions
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTURE IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
5SHOW BINARY IMG
6SHOW
FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
0THROUGH DISPLAY
qEXTENSION FUNC.
TYPE RUN COND SCREEN SAVE
1MONITOR OUTPUT
2CAPTURE IMG
3MESSAGE DISPLAY
4PATTERN DISPLAY
5SHOW BINARY IMG
6SHOW
FIX IMG
7OPS MAIN DISP
8DISP CHG-EVAL
9PC-MNTR
0THROUGH DISPLAY
qEXTENSION FUNC.
(TYPE00)AREA1
MEAS ms
MEASURE 0 CAM1 POSI DEVIATION
1
2
MNU-CHG NEXT-NG CHG-C1 CHG-C2 MANL-MEAS SHORTCUT
Cross hair cursor 1
2-13
F C1 BRT
CAM1
PARTIAL-IMG
YES(NUMERIC)
YES
YES
YES
YES
NO
NO
NO
MANL-MEAS
F C1 BRT
CAM1
OPS-MENU
PARTIAL-IMG
MAIN
YES(NUMERIC)
SELECT
YES
RETURN
YES
YES
YES
NO
NO
NO
NO
Cross hair cursor 2
2