Sharp IV-S30J User Manual page 142

Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from
the popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 14: Numerical calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using
the left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the
popup menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 16: Setting the Input/Output Conditions."
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be displayed
on the screen.
Final evaluation result
Measuring time
Measurement program
Registration number
in the measurement condition
NUMBER OF OBJECTS
TOTAL AREA
LABEL NUMBER
- CENT OF GRAV, MAIN AXIS
ANGL, FILLET WIDTH,
PERIPHERAL, or MID POINT
are displayed when
measurement of these
parameters has been specified
("YES" has been selected) on
the "MEAS COND" menu
(page 10-2).
OBJECT AREA
CENTER OF GRAVITY
COORDINATE
MAIN AXIS ANGLE
FILLET DIA
PERIPHERAL
9-9
Object Identification by Binary Conversion
(TYPE00)
OK
MEAS XXXXms
MEASUREMENT 1 LABEL-BIN-OBJ
REGISTER NO.0(0~3)
K=004 OK
A=006168 OK
LABEL NUMBER 000 000 003
R=001542 OK
GX=206.0 OK
GY=303.0
B= 028.0
FX=042
FY=037
CR=00138.8
CX=
CY=
X0 Y0 7
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
F C1 BRT
V*.**
9
READY