Bosch Carephone 52+ Operating Manual page 33

Carephone 52+
11 - 19 & 10 Phone number of the emergency call recipient
1.
2.
3.
The Carephone 52+ switches automatically to programming
step 12 and you can enter the next number.
NOTICE! When an emergency call is made, if the call to the
first call number is unsuccessful, the Carephone 52+ will try
the other numbers in the sequence 2 to 10. If the last number
has been dialled unsuccessfully, the unit starts with the first
number again and continues until it either sends an
emergency call successfully or all of the programmed
numbers have been tried 15 times.
Example: Carephone 52+ on an exchange line
Call number:
1.
2.
3.
After entering the call number, you enter the call destination,
e.g. the social alarm call centre. You can program:
NOTICE! After programming step 19 the Carephone 52+ goes
to programming step 10.
Table 12.2
Bosch Security Systems
Select programming step 11.
Enter the phone number of the emergency call recipient.
Press C to confirm.
B = Dial pause
D = Dial tone detection
# = Flash (see Section 19.2 Programming tables, page 50,
Programming step 21)
Phone number of the emergency call recipient
Area code
Dial tone detection
0 = social alarm call centre (Bosch protocol)
3 = social alarm call centre (CPC protocol)
4 = to phone
Operating Manual
Programming | en 33
F.01U.031.884 V4 | 2009.03