Table of Contents
Advertisement
26 en | Installation
11.3
Connection configuration
NOTICE! In the event of an emergency, the unit must be able to
i
send out an emergency call even if a phone call is in progress at the
time. The Carephone 52+ must interrupt the phone call in order to
do this.
To check whether an emergency call can be sent,
1.
2.
If the unit has been correctly installed the phone call will be
automatically disconnected.
3.
The unit can now be programmed as described in Section 12.
CAUTION! With a private branch exchange (PABX) there is no
!
guarantee that an ongoing conversation will be automatically
interrupted by the emergency call. For more information please
contact your PABX supplier.
11.4
De-installation
To switch off the Carephone 52+ you must remove the power
plug from the unit. This also shuts down the battery.
NOTICE! If you remove the power plug from your power outlet,
the unit will announce a power failure. The unit will
automatically switch over to battery operation.
F.01U.031.884 V4 | 2009.03
Make a phone call in the normal way.
While the call is in progress, press the emergency call
button to initiate an emergency call.
The test call described above should be made each time
the unit is reinstalled.
Operating Manual
Carephone 52+
Bosch Security Systems
Advertisement
Table of Contents
