Bosch Carephone 52+ Operating Manual page 25

Carephone 52+
3.
CAUTION! Only connect the unit to a phone outlet that has
!
been correctly installed by your telephone service provider.
4.
NOTICE! If you perform step 4 before step 3, you will hear the
i
announcement line failure.
All the indicator lamps light up for around 2 seconds (battery
test). The indicator lamps on the activity monitor reset button
and the emergency call button now light up. The unit immedi-
ately offers a choice of languages and then switches to standby
mode, see Section 12.6 The main programming steps, page 31,
Programming step 01. The unit can now be programmed.
CAUTION! The backup battery will now be charged up.
!
The battery is fully charged after 12 hours. The unit's full
volume will not be available until the battery is fully charged.
Bosch Security Systems
Now fit the plug on the telephone cord into the N socket of
your telephone outlet.
Plug the power adapter into the line power outlet.
Operating Manual
Installation | en 25
F.01U.031.884 V4 | 2009.03