Brother DCP-8070D Service Manual page 609

<WSW29> (Function setting 7)
Selector No.
1 Compression threshold level for
voice signals inputted via the
I
telephone line in the built-in TAD
3 operation (Not used.)
4 Compression threshold level for
voice signals inputted via the
I
handset in the built-in TAD
6 operation (Not used.)
Impedance switching control in
7
pulse dialing
Prompt beep when the memory
8 area for the activity report
becomes full
Note:
• Selectors 7 and 8 are applicable only to the European versions.
• Selector 8: Prompt beep for activity report
This selector determines whether or not to beep if the memory area for the activity report
becomes full, for prompting you to print out the report. (Printing it out will clear the memory
area.)
<WSW30> (Function setting 8)
Selector No.
1
Dial tone/busy tone detection
I level during recording of ICM
(Not used.)
3
4
I Not used.
6
Scanning magnification
7
adjusting function
8 Not used.
Function
Function
App. 1-32
Setting and Specifications
0: OFF 1: ON
0: No 1: Yes
Setting and Specifications
0: Enable 1: Disable
Confidential