Separate Roller Holder Assy - Brother DCP-8070D Service Manual

9.8.51 Separate Roller Holder ASSY

(1) Turn the ADF chute ASSY upside down.
(2) Remove the cup B M3x10 Taptite screw.
(3) Pull up the Separate roller holder ASSY and remove the Bushing from the Lower
document chute ASSY, and then remove the Separate roller holder ASSY.
Separate roller holder ASSY
Lower document chute ASSY
Assembling Note:
• When assembling the Separation roller gear 35, assemble the Bushing with aligning the
Boss of the Bushing with the notch on the ADF chute ASSY.
Taptite cup B M3x10
Boss
Bushing
Fig. 5-115
ADF chute ASSY
Bushing
Fig. 5-116
5-107
Separation roller gear 35
ADF chute ASSY
Confidential