Brother DCP-8070D Service Manual page 303

(5) Push the Hook of the Rear chute (indicated by the arrow 5a), and move the Eject
actuator to the direction of 5b.
(6) Lift up the Eject actuator to remove.
(7) Remove the Eject actuator spring.
Eject actuator
Assembling Note:
• When assembling the Eject actuator spring, ensure that its direction is correct referring
to the figure below.
Eject actuator spring
Eject actuator spring
Rib
7
6
5b
5a 5a
Fig. 5-18
Eject actuator
Fig. 5-19
5-50
Rear chute
Hook
Rear chute
Confidential