• ddddd
• eee
• ggg
HELP display:
Display 04: Values of P-TMSI, RAC, SMS radio
priority, Ciphering and Non-DRX parameters
Where:
• aaaaaaaa
• bbbb
• cccc
READY: MS is in READY state
FORCE: MS is in standby state after receiving "force
to standby" indication, otherwise STAND (xxxx
shown if in IDLE state)
The used timeout value for READY timer. Unit is
seconds. xxx if READY timer is deactivated.
Timeout value of T3312 timer. Range 000 - 192 and
unit is minutes. xxx if T3312 timer is deactivated.
P-TMSI value in hex format
RAC (Routing Area Code) in hex format
Ciphering value (negotiated by GMM): OFF / GEA1 /
GEA2
Note! Even if the value here would show that
ciphering is used, LLC may still send and receive
unciphered blocks.
30