Nokia 6310i User Manual page 29

• jj
• kkkk
• lllll
• m
• nnnnnnnn USF values of the latest TBF configuration, the first
• HELP display:
TFI of the latest TBF configuration, range 0 - 31. If
there is/was no downlink TBF in the latest TBF
configuration, xx is shown.
MAC mode, that is, resource allocation method, used
during the latest TBF configuration:
DYN
EDYN
FIXD
DUSF : USF granularity in use
EUSF : USF granularity in use
F_HD : Fixed Half Duplex
Type of current channel
In GPRS idle mode, if PBCCH supported in cell:
PCCCH, PBCCH, PAGCH, PNDRX (non-DRX state):
In GPRS idle mode, if PBCCH not supported in cell:
AGCH, NDRX (non-DRX state), CCCH, BCCH
In GPRS transfer mode: PDTCH
Other possibilities are the same as in Display 1 in
group 1.
R if MS is in READY state, S if GPRS is suspended and
otherwise empty.
value corresponding to timeslot 0, next to timeslot 1
and so on. The range of each USF value is 0 - 7. If
there is/was no uplink TBF, or dynamic allocation was
not used in the latest TBF configuration, xxxxxxxx is
shown. If there is/was an uplink TBF but not all the 8
time slots are/were used, x is shown in place of the
unused time slots.
27