Display 12: Switch Bts_Test Status - Nokia 6310i User Manual

Display 12: Switch BTS_TEST status

Mobile is searching
only for one frequency
Neighbour measurements
are not done.
This display is used to change the BTS_TEST carrier on the
permament memory. If the BTS_TEST carrier is stored in the
permament memory, then each time the mobile sends a search list
it uses only the carrier number stored on the Mobile Station the
permament memory. Also the neighbour information from the
system information messages is ignored. If the BTS_TEST carrier is
not stored, then the mobile behaves normally, that is, it performs
the neighbour measurements according to the GSM specifications.
Take the following steps to store the BTS test carrier:
1 In idle mode, press Menu.
2 Scroll in the menu main loop to the
Select.
3 Select display 12 in executive mode by keying in 0112 at the
Group/display: prompt.
4 When the test input prompt will be shown on the display, key in
the channel number and press OK.
5 Switch power off and on.
Take the following steps to deactivate BTS tests:
1 In idle mode, press Menu.
2 Scroll in the menu main loop to the
Select.
Mobile is
behaving normally.
Neighbour measurements
are done.
Net monitor item and press
Net monitor item and press
21