HUAWEI TE30 Videoconferencing Endpoint
User Guide
Step 2 Select Save.
----End
3.4 Setting Wi-Fi Parameters
To use your TE30 to implement video communication over a Wi-Fi network, configure the
Wi-Fi settings.
Setting Wi-Fi Client Parameters
After the Wi-Fi client is enabled, your TE30 functions as a Wi-Fi client and access a Wi-Fi
network after connecting to a wireless router.
Step 1 Choose Advanced Settings > Settings > Network > Wi-Fi > Wi-Fi Client and enable the
Wi-Fi client.
Your TE30 automatically scans for available wireless routers and lists the found wireless
routers under Wireless access point.
If you need to set a static IP address for your TE30, go to
Step 2 Select Advanced Settings. On the Advanced Wireless Settings screen, set IP parameters by
referring to
Step 3 Select Save.
Step 4 Select Scan.
Your TE30 automatically scans for available wireless routers and lists the found wireless
routers under Wireless access point.
Step 5 Under Wireless access point, select the wireless router to connect to.
Step 6 Press
select Connect.
When the TE30 is connected to one of the available routers, the status of that router will then
change to
----End
Setting Wi-Fi Hotspot Parameters
When the Wi-Fi hotspot is enabled, other devices can access a Wi-Fi network by connecting
to the TE30.
Step 1 Choose Advanced Settings > Settings > Network > Wi-Fi > Wi-Fi Hotspot and enable the
Wi-Fi hotspot.
Step 2 Select Advanced Settings. On the Advanced Wireless Settings screen, set the advanced
wireless network parameters by referring to
Issue 01 (2013-03-27)
3.1 Setting IP
Parameters.
on the remote control. When prompted, enter the security key or password and
.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step
2. Otherwise, go to
Table
3-4.
3 Network
Step
4.
18