Huawei V100R001 User Manual page 15

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Time zone
Time format
NMS server
Step 3 Select Next. Set the H.323 parameters by referring to
Step 4 Select Next. Set the Session Initiation Protocol (SIP) parameters by referring to
Step 5 Select Next. Set the video input parameters by referring to
Step 6 Select Save.
----End
Follow-up Procedure
To set date and time parameters listed in
General > Date and time.
Table 2-4 Date and time parameters
Parameter
Location
Issue 01 (2013-03-27)
Description
controlled UI.
Specifies the time difference between the
local time and the Greenwich Mean
Time (GMT).
Your TE30 automatically sets this
parameter based on your settings of
Location.
Specifies the format in which time is
displayed.
Specifies the IP address of the HUAWEI
SMC 2.0.
After you set this parameter and
Connection type, Local IP address,
Subnet mask, and Gateway address,
your TE30 automatically attempts to
obtain the HUAWEI SMC 2.0 settings.
After it obtains the configuration, it
displays the conferencing screen.
NOTE
This parameter is available on the General
screen only when you are configuring the
TE30 for the first time.
Description
Specifies the country or area where
your TE30 is located.
When you set this parameter, your
TE30 automatically adjusts the value
of the Time zone parameter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installation and Initial Configuration
Setting
The default value is
(GMT+08:00) Beijing,
Chongqing, Hong Kong,
Urumqi.
Your TE30 automatically sets
this parameter based on the
value set for Location.
The default value is 24-hour.
For details, contact the local
reseller or operator.
Table 3-2.
Table
Table 2-4, choose Advanced Settings > Settings >
Setting
The default value is China.
Table 3-3.
4-5.
7