Installer Setting - Option Function Setting
Setting feature for indoor unit when plasma purification / electric heater / humidifier / elevation
grill / ventilation kit / auxiliary heater is newly installed, or installed unit is removed.
INSTALLATION INSTRUCTION
If pressing
button long for 3
1
seconds, it enters into Thermostat
installer setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
If pressing
button repeatedly, it moves to
2
the selected option function code as picture
below.
Select existing condition
3
of each code by pressing
button.
(00: not installed,
01 : installed)
Function Code
Existing condition
4
Press
button to save.
5
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
75
Function
Code
Plasma purification
20
Electric heater
21
Humidifier
22
Elevation grill
23
Ventilation kit
24
Auxiliary heater
25