Standard Operation - Temperature Setting - LG PREMTB10U Installation & Operation Manual

Standard Operation – Temperature Setting
• For air-cooling set point, from 64~86 °F (16~30 °C), and for heating set point, from
60~86 °F (16~30 °C), you can select desired temperature.
C A temperature area of extended range can be selected through desired temperature
range setting option.
- Cooling : 64~99 °F (16~37.5 °C) / Heating : 40~86 °F (4~30 °C)
• 10°F is proper for the difference between room and outside temperature.
- When combine with other controllers, temperature gap expressed by criterion of each
controllers can be generated.
• For indoor temperature below 50 °F (10 °C), the value perceived by the Thermostat(with
cable) is displayed.
OPERATION INSTRUCTION
1 You can simply adjust the desired temperature.
• Press the buttons to adjust the
desired temperature.
In Auto mode, both setpoints will adjust
simultaneously. To adjust cooling and heating
setpoints individually when in Auto mode, first
press the cool or heat setpoint selection button.
: Increase Temp. per one time
pressing
: Decrease Temp. per one time
pressing
• Set temp: Indicate the temperature
that user want to set.
Cooling operation:
- The cooling mode doesn't work if desired
temperature is higher than room
temperature. Please lower the desired
temperature.
Heating operation:
- The heating mode doesn't work if desired
temperature is lower than room
temperature. Please increase the desired
temperature.
Room Temperature Check the room
When Thermostat is running room
temperature will be displayed on window.
Room temperature display range
Fahrenheit: 33~99°F
- below 32°F: display 'LO'
- over 100°F: display 'HI'
Celsius: 1~39
- below 0°C: display 'LO'
- over 40°C: display 'HI'
- Because of location of Temperature
sensing, the real room temperature and the
this displayed value can be different.
19