Setting the Interfaces
Setting Wander Transmit Interface
6 Choose the WANDER MASK setting required.
You can choose the wander modulating frequency and wander
amplitude if
OFF
If you choose
SPOT
wander amplitude is adjusted and controlled according to your wander
frequency choice.
SONET Wander (STS-3, OC-3, OC-12, OC-48)
7 Set up the SONET transmit interface. See "Setting SONET Transmit
Interface" page 4.
8 Choose JITTER/WANDER
If you wish to add jitter to the SONET signal, see "Setting Jitter
Transmit Interface " page 7.
9 Choose WANDER
10 Choose the WANDER MASK setting required.
You can choose the wander modulating frequency and wander
amplitude if
OFF
If you choose
SPOT
wander amplitude is adjusted and controlled according to your wander
frequency choice.
10
is chosen.
, you can choose the "spot" wander frequency. The
.
WANDER
.
ON
is chosen.
, you can choose the "spot" wander frequency. The