Setting Wander Transmit Interface - HP OMNIBER 718 37718A User Manual

Description:
HOW TO:
Setting the Interfaces

Setting Wander Transmit Interface

Setting Wander Transmit Interface
You can add Wander to the 2 Mb/s DSn signal and the STS-3, OC-3,
OC-12 or OC-48 SONET signal.
DSn Wander (2 Mb/s)
1 Connect REF OUT on the SONET Clock module to REF IN on the DSn
Jitter TX module (this provides the Wander Reference).
2 Set up the DSn transmit interface, choose CLOCK SYNC
select the SOURCE required from the menu. See "Setting DSn
Transmit Interface" page 2.
3 Choose JITTER/WANDER
If you wish to add jitter to the DSn signal, See "Setting Jitter Transmit
Interface" page 7.
4 Choose WANDER
5 Choose the modulation source.
If is chosen, connect the external source to the MOD IN
EXTERNAL
port of the DSn Jitter TX module. Up to 10 UI of external wander
modulation can be added.
.
WANDER
.
ON
and
2M REF
9