Answering Calls In The Hunt Group; Using The Speakerphone; Answering A Call With The Headset - Siemens HiPath 4000 Operating Manual

Step by Step
~
Enter the code!
Displaying the extension called
If the number of the extension where you want to pick
up a call is not displayed in a call pickup group, you can
lift the handset and enter the code for "Display on re-
quest". Ask your service personnel for this code.
c
Press the talk key.
The extension number is displayed after you enter the
code.

Answering Calls in the Hunt Group

All team members can also be reached at a hunt group
station number.
Your telephone rings.
c
Press the talk key.

Using the Speakerphone

A colleague addresses you directly over the speaker.
Speakerphone mode and open listening are automati-
cally activated.
You can automatically answer in speakerphone mode.
c
or Press the talk key and answer the call.
Placing a speaker call to a colleague
Activating speaker call protect

Answering a Call with the Headset

The procedure is the same as for speakerphone mode
Page 27.
Precondition: The headset is connected.
d
The LED flashes to signal an incoming call.
Press the speakerphone key. Conduct the call.
Ending a call
d
Press the speakerphone key. The LED goes out.
Making Calls – Enhanced Functions
Page 101.
Page 56.
49