Siemens HiPath 4000 Operating Manual page 37

Step by Step
v
Act. FWD-VAR-ALL-BOTH?
Save?
v
Program/Service?
Destinations?
Call forwarding?
Next forwarding type?
Next forwarding type?
v
Deactivate?
FWD-VAR-ALL-INT
Activating variable call forwarding
Variable call forwarding is automatically activated by
programming the call forwarding destination.
You can also activate unconditional variable call forward-
ing in the idle menu.
OK
Select when the handset is idle and confirm.
~
Enter the destination number.
If you enter a system-wide station number, you
must terminate it with
OK
Confirm. Call forwarding is immediately active.
Deactivating variable call forwarding
You can deactivate all variable call forwarding types over
the Program/Service menu.
OK
Select and confirm.
OK
Confirm.
OK
Confirm. "FWD-VAR-ALL-BOTH" is displayed.
OK
Confirm. "FWD-FIXED" is displayed.
>
OK
Confirm. "FWD-VAR-ALL-INT" is displayed.
>
OK
Select and confirm. Variable call forwarding is deactivat-
ed and the call forwarding destination is deleted.
Output in the first line, for example, for "FWD-VAR-ALL-
off
INT".
To select another variable call forwarding type, proceed
as described on
Displaying call forwarding
To check the relevant call forwarding types, proceed as
described on
displayed in the first line. The second line contains the
call forwarding destination if this type of variable call for-
warding is active.
Making Calls – Basic Functions
#
.
Page 35.
Page 35. The status "ON" or "OFF" is
37